Showing posts with label Ballgown. Show all posts
Showing posts with label Ballgown. Show all posts

Sunday, 1 February 2015

Finished ball gown


This was from my first lot of fittings with Jools, I made a couple alterations to the dress 
including adding two darts at the side and decreased the length of the bodice. 


During the fitting I marked up where the hem should be. To evenly mark this along the whole skirt
I put the mannequin on the table and created a little card board piece and measured the hem up from the table. 


I stitched the darts in and made alterations to the dress, I also made a small stop in the channel for the elastic so that she can pull the waist in more after she has put it on. 


This is the back of the dress with a small slit and a nice sparkly jewel for a button. 



I am extremely pleased with this dress, I love the shape I think it is extremely classy and the fabric 
chosen has been fine to work with and looks lovely when it moves and the golden blue colour shines 
through. 




Friday, 23 January 2015

Second fitting of the burgundy dress


The first fitting I had none of the three sections to the dress were together, before my second fitting 
I gathered the top in areas and stitched ruffles together to keep 
it all in place, in a natural way. I also thinned the strap using this technique also. 


I then attached the top to the waist piece. I turned under and slip stitched the top of the waist
at the back down and tacked back at the center back also. I then stitched the skirt onto the waist piece


This fit amazingly well, A very happy housemate, now I can go on and complete the dress with
fastenings and hems. 


Wednesday, 21 January 2015

Gold Blue shot Ballgown

The ballgown I am currently making alongside the burgundy dress is quite a simple shape dress. I am using a vogue pattern to create it. 
I began by putting together the top half, it is all bagged out, so I stitched part of the arm holes together and the neckline of the front piece (right sides together), and the same for the back two pieces 

I then stitched my name label in, stitched the side seams together, the shoulder seams together then hand stitched the last bit of the arm hole back up! I have never used this process before to put together a fully bagged out bodice. I will definitely use it again! Very simple and easy to do. I then stitched the skirt panels together and the skirt lining panels together then slotted them together and tacked them. I then attached the full skirt to the outside bodice, leaving the bodice lining out. In the seam allowance of the skirt I stitched around again then slotted the elastic through it to pull it in at the waist. I then slip stitched the bodice lining down hiding everything in the waistband. 
This just needs to be tried on to fit properly and I can make any adjustments or alterations


Monday, 19 January 2015

Fitting Burgundy Ballgown

.

I manipulated the top to put the gathers in flattering areas and pinned the top half to the bodice! The bodice fit great and the gathered skirt highlighted her small waist! I am really pleased with how this dress has come along and can't wait to finish it off! once I have made these adjustments I will stitch the bodice to the skirt.